- undefined
- undefined
- undefined
- undefined
-
- ¡Intentar construir su término de la búsqueda una a la vez, y ser tan específico como usted puede! Buscar el ejemplo del término: “tos crónica”.
- No incorporar los resultados múltiples tales como "anemia, tos crónica, pérdida de peso, vomitando" todos al mismo tiempo.
- Después de seleccionar su término de la búsqueda resulta una lista de diagnosis posibles será generada. Si la lista es demasiado larga, usted podrá enangostarla abajo incorporando términos adicionales.
- No incorporar los valores tales como "ritmo 110 del corazón" o "sodio 125", en lugar uso "taquicardia" o "hyponatremia".
Información de la droga para 3% and 5% Sodium Chloride Injection, USP in VIAFLEX Plastic Container (Baxter Healthcare Corporation): HOW SUPPLIED
- DESCRIPTION
- CLINICAL PHARMACOLOGY
- INDICATIONS AND USAGE
- CONTRAINDICATIONS
- WARNINGS
- PRECAUTIONS
- ADVERSE REACTIONS
- DOSAGE AND ADMINISTRATION
- HOW SUPPLIED
3% and 5% Sodium Chloride Injection, USP in VIAFLEX plastic container is available as follows:
Code Size (mL) NDC Product Name 2B1353 500 0338-0054-03 3% Sodium Chloride Injection, USP 2B1373 500 0338-0056-03 5% Sodium Chloride Injection, USP Exposure of pharmaceutical products to heat should be minimized. Avoid excessive heat. It is recommended the product be stored at room temperature (25°C); brief exposure up to 40°C does not adversely affect the product.
Directions for Use of VIAFLEX Plastic Container
Warning: Do not use plastic containers in series connections. Such use could result in air embolism due to residual air being drawn from the primary container before administration of the fluid from the secondary container is completed.
To Open
Tear overwrap down side at slit and remove solution container. Some opacity of the plastic due to moisture absorption during the sterilization process may be observed. This is normal and does not affect the solution quality or safety. The opacity will diminish gradually. Check for minute leaks by squeezing inner bag firmly. If leaks are found, discard solution as sterility may be impaired. If supplemental medication is desired, follow directions below.
Preparation for Administration
- Suspend container from eyelet support.
- Remove plastic protector from outlet port at bottom of container.
- Attach administration set. Refer to complete directions accompanying set.
To Add Medication
Warning: Additives may be incompatible.
To add medication before solution administration
- Prepare medication site
- Using syringe with 19 to 22 gauge needle, puncture resealable medication port and inject.
- Mix solution and medication thoroughly. For high density medication such as potassium chloride, squeeze ports while ports are upright and mix thoroughly.
To add medication during solution administration
- Close clamp on the set.
- Prepare medication site.
- Using syringe with 19 to 22 gauge needle, puncture resealable medication port and inject.
- Remove container from IV pole and/or turn to an upright position.
- Evacuate both ports by squeezing them while container is in the upright position.
- Mix solution and medication thoroughly.
- Return container to in use position and continue administration.
- Drug Information Provided by National Library of Medicine (NLM).